The patent pending Dakota Confidence Fall-Off Bumper prevents your arrow from falling off to the inside of your arrow rest, between the launchers and riser where you might not notice it. The Dakota Confidence Fall-Off Bumper works with most bow and arrow rest combinations.

• Prevents arrow from falling off to the inside of a shoot-through arrow rest.
• Adjustable to automatically place arrow back on the rest.
• Does not affect arrow flight.
• Works with most shoot-through arrow rests.

• Mount the bumper in the arrow rest attachment hole in the riser.
  NOTE: for bows with two arrow rest attachment holes in the riser, mount the bumper in the unused hole. For bows with only one arrow rest attachment hole in the riser, you may need to replace the screw holding the arrow rest with one of the included shorter 5/16 x 24 3/4" screws in order to mount the bumper in the same hole as the arrow rest.
• If necessary, add one or more washers (included) to move the bumper away from the riser and closer to the rest prongs.
• Bumper is properly adjusted when the arrow hits the bumper and automatically falls back on the rest prongs.
• Be careful not to over tighten the bumper.